Full Body Red Light Therapy Blanket KBS07002 1 / 8

Full Body Red Light Therapy Blanket KBS07002

SKU: kbs07002

Full body red light therapy blanket with 1370 x 660nm and 2740 x 850nm LED chips, 120W output and a 180 x 85cm surface with arm flaps. Five brightness levels, nine timers and 10/40Hz pulse, built for OEM and private label orders.

  • Wavelengths: 660nm Red, 850nm Near-Infrared
  • 1370 x 660nm red LEDs plus 2740 x 850nm near-infrared chips
  • 120W output from a single dense array
  • 180 x 85cm full body surface with arm flaps at the shoulders
  • 5 brightness levels P1-P5 with 10/40Hz pulse
  • 9 timer steps from 10 to 90 minutes
  • Waterproof TPU shell that wipes clean
  • Controller, power adapter, cord and eye shields included
  • OEM / ODM: logo, packaging, size and wavelength mix

INTERESTED IN THIS PRODUCT?

KBS07002 is a full body red light therapy blanket built around a 1370 chip 660nm array layered with 2740 near-infrared 850nm chips, drawing 120W from a single external adapter. The 180 x 85cm surface runs from head to feet in one piece, and the arm flaps close the gap at the shoulders that a plain rectangular mat always leaves open.

Five brightness levels (P1-P5) and nine timer steps from 10 to 90 minutes are set from the hand controller, with 10Hz and 40Hz pulse modes for different session styles. The controller shows gear, time and pulse on one screen, so a user does not need to read a manual twice.

The shell is a waterproof TPU laminate that wipes clean between users and folds flat for storage. Everything needed to run a session ships in the box: controller, power adapter, power cord and eye shields.

For brands and distributors we build this model to your specification: logo and print, retail packaging, blanket dimensions, wavelength mix and controller labelling. Not a medical device. Wellness use only.

- LED quantity: 1370 x 660nm + 2740 x 850nm chips

- Wavelength: 660nm red, 850nm near-infrared

- Power: 120W, external power adapter

- Brightness levels: P1, P2, P3, P4, P5

- Timer: 10 / 20 / 30 / 40 / 50 / 60 / 70 / 80 / 90 minutes

- Pulse mode: 10Hz / 40Hz, switchable

- Size: 180 x 85cm (71 x 33.4in), arm flaps included

- Shell: waterproof TPU, wipe-clean surface

- Accessories: controller, power adapter, power cord, eye shields

- Certification: CE, RoHS - documents available on request

- OEM / ODM: logo, packaging, size and wavelength mix

  1. Plug the power cord into the outlet, then connect the controller to the power cord.
  2. Press and hold the power button for 3 seconds to switch the device on.
  3. Press LED+ or LED- to set the red light level from P1 to P5.
  4. Press TIME+ or TIME- to set the session length from 10 to 90 minutes.
  5. Press M to switch pulse mode between 10Hz and 40Hz. Press P at any time to pause and stop the timer.
  6. Press and hold the power button for 3 seconds to switch the device off.

Before the first full session, run 10 minutes at P1 on the inner forearm.

If redness is gone within 2 hours, the session length can be increased. If redness lasts longer than 2 hours, wait 24 hours and start again at a lower level.

Do not use over the eyes. Eye shields are supplied for sessions that include the head area.