Rebeatec XPRE539 Handheld Red Light Eye Device 1 / 3

Rebeatec XPRE539 Handheld Red Light Eye Device

SKU: XPRE539

Cordless handheld eye device with a single 630 nm red source, 2 W output and a metal body. 400 mAh battery, roughly one hour of runtime, Type-C charging.

  • Wavelengths: 630 nm
  • Single 630 nm red source
  • 2 W output from a metal body
  • 400 mAh battery, about one hour of runtime
  • Type-C charging, full in about four hours
  • Cordless - no cable during a session
  • OEM body colour, logo and packaging on request

INTERESTED IN THIS PRODUCT?

A handheld unit rather than a mask: the head is placed against the orbital area and moved across it, so the light goes where you aim it instead of washing over the whole eye region.

The body is metal, which matters for two reasons in this category — it takes a drop better than ABS, and it stays cool enough to hold for a full session at 2 W.

One 630 nm red source, no blue, no near-infrared. That makes it the simplest unit in our eye range and the easiest to explain on a listing page.

Built for private label: body colour, logo, packaging and manual language are all specified per order.

Brand Model: XPRE539

Product Type: Cordless handheld red light eye device

Wavelength: 630 nm ± 10 nm

Rated Power: 2 W

Rated Input: 5 V / 1 A

Battery: 400 mAh

Runtime: approx. 1 hour at the highest setting

Charging: Type-C, approx. 4 hours

Body: metal

Light Modes: multiple, selected on the device

Customization: body colour, logo, packaging and manual language

Specification as published in the factory catalogue, September 2026.

Irradiance (mW/cm²) has not been issued for this model. Ask us for the measurement report before you publish a dosage claim.

1. Charge fully before first use. Charging runs over Type-C at 5 V / 1 A and takes about four hours.

2. Switch on with the button on the body, then step through the available light programmes.

3. A full charge gives roughly one hour of runtime at the highest setting.

Full illustrated instructions are supplied with every unit. Ask us for the manual in your target language before you print your own packaging.