RYYSK-06 Laser Scalp Care Helmet | 650 nm 1 / 3

RYYSK-06 Laser Scalp Care Helmet | 650 nm

SKU: ryysk-06

Create a dedicated moment for scalp care with the Rebeatec RYYSK-06. This wearable helmet features 212 laser diodes emitting 650 nm red light, four selectable scalp coverage modes, and voice guidance. Wear-sensor light control, a 30-minute automatic timer, and a 3,400 mAh rechargeable battery make it easy to fit into your personal care routine.

  • Wavelengths: 650 nm Red Laser Light
  • • 650 nm Red Laser Light — A laser light source for your scalp care routine.
  • • 212 Laser Diodes — Each diode has a rated optical output of 5 mW.
  • • Four Scalp Coverage Modes — Select from four coverage settings.
  • • Voice Guidance — Audio prompts support device operation.
  • • Wear-Sensor Control — Light output is controlled according to wearing status.
  • • 30-Minute Automatic Timer — Each session ends automatically.
  • • 3,400 mAh Rechargeable Battery — Built-in battery power for cordless use.
  • • Wearable Helmet Design — Hands-free use during a quiet moment at home.

INTERESTED IN THIS PRODUCT?

Make time for scalp care with the Rebeatec RYYSK-06 Laser Scalp Care Helmet.


Designed for wearable use, the RYYSK-06 features 212 laser diodes with a wavelength of 650 nm. Four selectable scalp coverage modes let you choose from different coverage settings, while voice guidance helps you follow device operation.


The integrated wear sensor controls light output according to wearing status. A 30-minute timer automatically ends each session, providing a defined routine without the need to track the time yourself.


A built-in 3,400 mAh rechargeable battery powers the helmet for cordless use. The wearable design leaves your hands free while you take a quiet break or read at home.


With selectable coverage, voice guidance, and automatic session timing, the RYYSK-06 brings practical features together for your scalp care routine.


• Model: RYYSK-06

• Product Type: Laser Scalp Care Helmet

• Light Source: Laser diodes

• Wavelength: 650 nm red laser light

• Number of Laser Diodes: 212

• Rated Optical Output per Diode: 5 mW

• Combined Rated Diode Output: 1,060 mW (1.06 W), based on 212 × 5 mW

• Laser Layout Area: 548 cm²

• Scalp Coverage Modes: 4 selectable modes

• Guidance: Voice guidance

• Sensor: Wear sensor for light-output control

• Session Timer: 30 minutes with automatic session end

• Battery: Built-in 3,400 mAh rechargeable battery


1. Read the supplied user manual before first use, including the safety instructions and suitability information.

2. Charge the helmet according to the manufacturer's instructions.

3. Position the helmet on your head as shown in the manual so the wear sensor can function correctly.

4. Switch on the device and select one of the four scalp coverage modes. Follow the voice guidance and operating instructions.

5. The timer automatically ends the session after 30 minutes. Stop earlier if you experience discomfort.

6. Switch off the device after use. Clean and store it according to the manual.


Follow the manufacturer's recommended session frequency. Do not look directly into the laser emitters or attempt to bypass the wear sensor.


Before first use, check the supplied user manual for this model's light-sensitivity screening instructions. If a preliminary test is specified, follow the exact method, duration, and observation period provided by the manufacturer.


If you have a known sensitivity to light or use medication or products that may increase light sensitivity, consult a qualified healthcare professional before use.


Stop use if redness, itching, burning, or other discomfort occurs. A preliminary test does not guarantee that a later reaction will not occur.