1 / 3
Rebeatec RGHW02 USB Red Light Wrist Wrap
SKU: hghw02
USB-powered red light wrist wrap with 36 tri-chip LEDs, 660 nm red and 850 nm near-infrared light, four light modes and a thumb-hole design for daily wrist care.
- Wavelengths: 850 nm Near-Infrared Light
- 36 tri-chip LEDs with 660 nm red and 850 nm near-infrared light
- 2: 1 red-to-near-infrared emitter ratio
- 4 light modes
- USB-powered plug-in operation at 5 V / 2 A
- Integrated control button
- Thumb-hole design and wraparound fastening
- Black chloroprene rubber and fabric construction
- 37 × 9 cm product dimensions
- Wholesale and private label inquiries welcome
INTERESTED IN THIS PRODUCT?
The Rebeatec RGHW02 is a plug-in red light wrist wrap designed for everyday personal care. Its 36 tri-chip LEDs combine two 660 nm red emitters and one 850 nm near-infrared emitter per chip.
The black wrap features four light modes, an integrated control button and a thumb-hole design. Its chloroprene rubber and imitation OK fabric construction wraps around the wrist, with product dimensions of 37 × 9 cm.
Connect the supplied USB cable to a suitable 5 V / 2 A power source during use. This model requires an external power connection and is not a cordless rechargeable device. 
Model: RGHW02
Product Type: USB-Powered Red Light Wrist Wrap
Color: Black
Product Dimensions: 37 × 9 cm
LED Quantity: 36 tri-chip LEDs
LED Configuration: 2 × 660 nm red + 1 × 850 nm near-infrared emitters per chip
Red-to-NIR Emitter Ratio: 2:1
Materials: Chloroprene rubber and imitation OK fabric
Rated Power: 10 W
Power Input: 5 V / 2 A
Power Supply: External USB power required during use
Light Modes: 4
Irradiance: Supplier-stated 50–90 mW/cm²; measurement distance and test conditions to be confirmed
Package Contents:
Red light wrist wrap × 1
USB power cable × 1
English user manual × 1
Packaging:
Packaging Type: Frosted bag
Bag Dimensions: 14 × 20 cm
Packed Unit Weight: 78.5 g
Carton Dimensions: 60 × 50 × 40 cm
Quantity per Carton: 300 units
Carton Gross Weight: 24.85 kg
Documentation:
Contact us to confirm available FDA-related documentation and its applicable scope for this model.
1. Read the RGHW02 user manual before use.
2. Place your thumb through the opening and position the LED side toward your wrist as instructed.
3. Wrap and fasten the strap comfortably without overtightening.
4. Connect the supplied USB cable to a suitable 5 V / 2 A power source.
5. Use the integrated control to select a light mode according to the manual. Follow its session duration and frequency instructions.
6. Switch off and disconnect power before removing, cleaning or storing the wrap.
Follow all product precautions. Avoid looking directly into the LEDs and stop use if discomfort occurs.
Before first use, consult the RGHW02 user manual for any required sensitivity check, including settings, duration and observation period. Contact Rebeatec if these instructions are not available. Do not substitute a generic procedure for the model-specific instructions.