1 / 4
Rebeatec XPRE322 Silicone LED Face Mask with Handset Controller
SKU: XPRE322
432 diodes from 108 four-in-one packages, four wavelengths and a tethered handset that sets mode and session length. Black silicone shell, ten to thirty minute sessions.
- Wavelengths: 630 / 450 / 580 / 850 nm
- 432 diodes from 108 four-in-one packages
- Four wavelengths on one package footprint — 630, 450, 580 and 850 nm
- Five modes, stepped through with the power key
- 10 / 20 / 30-minute sessions set on the handset
- Cell and controls live in the handset, so the mask stays light
- Black silicone shell, painted and silk-screened
- Open eye window for use while reading
- OEM shell colour, logo and packaging
INTERESTED IN THIS PRODUCT?
The XPRE322 sits between the two ends of the silicone mask range: more emitters than the single-button XPRE448, fewer than the LCD-controlled XPRE458, with the settings moved off the mask and onto a handset at the end of a cord.
Light comes from 108 four-in-one packages, which is 432 diodes across the shell. Each package carries red, blue, yellow and near-infrared, so all four wavelengths run from the same footprint and the five modes — red, blue, yellow, near-infrared and red plus blue — are a matter of which channel is driven rather than which diodes exist.
The handset carries two keys: one switches the mask on and off and steps through the modes, the other sets the session to 10, 20 or 30 minutes. Because the cell lives in the handset instead of on the face, the mask itself stays light, and the display on the handset reports charge state as the cell drains or refills over USB-C.
The shell is black silicone, painted and silk-screened rather than left raw, with an open eye window so the wearer can keep reading through a session. Built to order: shell colour, logo, packaging and manual language. The document does not state an irradiance figure — if you need to quote a dose, ask us for a measured value first.
Comparing the three silicone shells side by side: XPRE448 vs XPRE322 vs XPRE458.
Brand Model: XPRE322
Product Type: Silicone LED face mask with tethered handset controller
LED Packages: 108 four-in-one (432 diodes)
Wavelengths: 630 nm red, 450 nm blue, 580 nm yellow, 850 nm near-infrared
Modes: 5 — red, blue, yellow, near-infrared, red + blue
Session: 10 / 20 / 30 minutes, timed shut-off
Controls: 2 buttons on the handset — power / mode, time
Display: charge state on the handset
Charging: USB-C, 5 V / 1 A, 800 mm cable
Body: silicone shell, black, painted and silk-screened
Eye Window: open, wear while reading
Standards: GB 4706.1, GB/T 36419-2018
Customization: shell colour, logo, packaging, manual language
1. Long press the power key for about 1.5 seconds. The mask lights in red and starts a ten-minute session.
2. Short press the power key to step through the modes: red, blue, yellow, near-infrared, red + blue. The timer restarts at each change.
3. Short press the mode key on the handset to move the session between 10, 20 and 30 minutes.
4. Long press to switch off, or let the timer run out and the mask shuts down by itself.
5. Charge over USB-C. The battery symbol on the handset fills while charging and stays solid when full; when the cell is low it flashes quickly as a warning.